2022 Hyundai Palisade
2 Recalls for 2022 Hyundai Palisade
Recall Date | Component | Summary |
---|---|---|
2022-08-18 | TRAILER HITCHES | Hyundai Motor America (Hyundai) is recalling 2020-2022 Palisade vehicles potentially equipped with a tow hitch harness installed as original equipment, or purchased as an accessory through a Hyundai dealership. Debris and moisture accumulation on the tow hitch harness module printed circuit board (PCB) may cause an electrical short, which can result in a fire. Remedy: Owners are advised to park outside and away from structures until the recall repair is complete. As an interim repair, dealers will inspect the tow hitch module and remove the fuse, as necessary, free of charge. The final remedy is currently under development. Owner notification letters are expected to mailed October 17, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 235. |
2022-05-18 | ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL | Hyundai Motor America (Hyundai) is recalling certain 2022 Palisade vehicles. The instrument cluster assembly may have been manufactured with excessive adhesive, which can disable the instrument cluster display screen. Remedy: Dealers will replace the instrument cluster assembly, free of charge. Owner notification letters are expected to be mailed July 15, 2022. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 230. |
0 Complaints sent to the Center for Auto Safety for 2022 Hyundai Palisade
Date | Component |
---|
0 Complaints submitted to NHTSA for 2022 Hyundai Palisade
Date | Component |
---|
0 Investigations for 2022 Hyundai Palisade
Date Opened | Date Closed | Component |
---|
21 Service Alerts for 2022 Hyundai Palisade
Date | Description |
---|---|
2022-07-14 | 190000 TIRES
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-07-28 | 060000 ENGINE AND ENGINE COOLING
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-06-03 | 010000 STEERING
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-05-04 | 010000 STEERING
Certain 2019-2022MY Palisade (LX2) vehicles may display a haptic motor check on the cluster. This bulletin provides the procedure to update the Integrated Central Control Unit (ICU) software to resolve this condition. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-05-04 | 118000 ELECTRICAL SYSTEM:SOFTWARE
Certain 2019-2022MY Palisade (LX2) vehicles may display a haptic motor check on the cluster. This bulletin provides the procedure to update the Integrated Central Control Unit (ICU) software to resolve this condition. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-05-19 | 100000 POWER TRAIN
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and harness. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-05-19 | 061600 ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE (ECU/ECM)
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related input/output speed sensor and harness. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-04-28 | 100000 POWER TRAIN
If you are servicing an applicable vehicle with a Check Engine light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and valve body harness. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-04-08 | 010000 STEERING
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-04-08 | 010000 STEERING
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-03-21 | 220000 SEATS
Some 2020-2022 Palisade (LX2) third row seats may be inoperative or may not fully reach the open or folded position. This bulletin provides information for troubleshooting the third row seat. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-03-16 | 160000 STRUCTURE
Certain 2020 2022MY Palisade (LX2) vehicles may have been produced with a rough edge on the front door lower garnishes during manufacturing. This bulletin describes the procedure to repair the condition. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-02-02 | 100000 POWER TRAIN
Some vehicles may experience a noise from the transmission when shifting between Drive and Reverse when the powertrain is at normal operating temperature. This bulletin describes the procedure to inspect, and if necessary, replace the dri Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-02-08 | 160000 STRUCTURE
Certain 2020 2022MY Palisade (LX2) vehicles may have been produced with a rough edge on the front door lower garnishes during manufacturing. This bulletin describes the procedure to repair the condition. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-02-08 | 350000 EQUIPMENT
Certain 2020 2022MY Palisade (LX2) vehicles may have been produced with a rough edge on the front door lower garnishes during manufacturing. This bulletin describes the procedure to repair the condition. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-01-21 | 100000 POWER TRAIN
This TSB provides a procedure to diagnose the push button shifter operation. If you are servicing a vehicle with any symptoms or DTC listed below, follow the Service Procedure, Page 2. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-01-21 | 060000 ENGINE AND ENGINE COOLING
This bulletin provides the procedure to update the ECU and TCU software with revised logic to reduce hesitation when accelerating from a stop due to ISG and improve shift quality. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-01-21 | 118000 ELECTRICAL SYSTEM:SOFTWARE
This bulletin provides the procedure to update the ECU and TCU software with revised logic to reduce hesitation when accelerating from a stop due to ISG and improve shift quality. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2022-01-21 | 103110 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE
This bulletin provides the procedure to update the ECU and TCU software with revised logic to reduce hesitation when accelerating from a stop due to ISG and improve shift quality. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2021-12-22 | 070000 FUEL SYSTEM, GASOLINE
This bulletin describes the procedure to inspect and if necessary, replace the fuel cap to ensure a positive audible click sound can be heard when tightening the cap. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |
2021-10-01 | 010000 STEERING
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication") |