2011 HYUNDAI Genesis Coupe Recalls, Complaints and Investigations

These recalls apply to the make, model, and year of your car – and should be fixed as soon as possible.

3 Recalls for 2011 HYUNDAI Genesis Coupe

Recall Date	Component	Summary
2013-04-01	EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH	Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate. Remedy: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai’s recall campaign number is 110.
2016-10-07	AIR BAGS:SENSOR:OCCUPANT CLASSIFICATION	Hyundai Motor America (Hyundai) is recalling certain model year 2010-2016 Genesis Coupe vehicles manufactured December 12, 2008, to June 11, 2016. The electrical harness connector for the front passenger seat Occupant Classification System (OCS) may dislodge when the seat is moved. Remedy: Hyundai will notify owners, and dealers will secure the OCS connector to prevent it from disconnecting, free of charge. Parts are not currently available and a second letter will be sent to owners when parts are available. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai’s number for this recall is 151.
2013-04-01	EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH \| SERVICE BRAKES, HYDRAULIC:SWITCHES:BRAKE LIGHT	Hyundai Motor Company (Hyundai) is recalling certain model year 2006-2009 Accent, model year 2007-2011 Azera, Sonata and Sante Fe,2006-2011 Tucson, 2009-2011 Elantra Touring, 2007-2010 Elantra, 2008-2011 Veracruz, 2009-2011 Genesis, 2010-2011 Genesis Coupe, 2007-2008 Entourage, and 2006-2008 Tiburon vehicles. Originally, in April 2013, Hyundai recalled 1,059,824 model year 2007-2009 Accent and Tucson, model year 2007-2010 Elantra, model year 2007-2011 Santa Fe, model year 2008-2009 Veracruz, model year 2010-2011 Genesis Coupe, and model year 2011 Sonata vehicles. In September 2013, Hyundai informed the agency that it was adding more vehicles to this campaign, representing an additional 652,512 units. The total number of vehicles being recalled is now 1,712,336. In the affected vehicles, the stop lamp switch may malfunction. A malfunctioning stop lamp switch may cause the brake lights to not illuminate when the brake pedal is depressed or may cause an inability to deactivate the cruise control by depressing the brake pedal. Additionally, a malfunctioning stop lamp switch may also result in intermittent operation of the push-button start feature, affect the operation of the brake transmission shift interlock feature, preventing the shifter from being moved out of the PARK position and cause the Electronic Stability Control (ESC) malfunction light to illuminate. Remedy: Hyundai will notify owners, and dealers will replace the stop lamp switch, free of charge. The safety recall began on April 22, 2013. Owners may contact Hyundai at 1-800-633-5151. Hyundai’s recall campaign number is 110.

These are complaints about vehicles like yours and some can only be found here. Do they sound familiar?

0 Complaints sent to the Center for Auto Safety for 2011 HYUNDAI Genesis Coupe

skip to NHTSA complaints

Date			Component

13 Complaints submitted to NHTSA for 2011 HYUNDAI Genesis Coupe

skip to CAS complaints

Date			Component
2017-02-01			POWER TRAIN ODI Number: 10948906
2020-05-20			AIR BAGS ODI Number: 11325311
2020-01-07			SERVICE BRAKES ODI Number: 11297573
2019-09-13			ENGINE ODI Number: 11255361
2019-04-29			SERVICE BRAKES ODI Number: 11204308
2017-10-03			POWER TRAIN ODI Number: 11031575
2017-09-29			ELECTRICAL SYSTEM ODI Number: 11030467
2015-10-04			AIR BAGS \| STRUCTURE:BODY ODI Number: 10779553
2014-06-23			AIR BAGS ODI Number: 10605214
2014-04-02			STEERING \| STRUCTURE ODI Number: 10576633
2014-02-03			POWER TRAIN ODI Number: 10562692
2014-01-26			SERVICE BRAKES ODI Number: 10561537
2013-09-20			STEERING ODI Number: 10544643

Is the government investigating the safety of your vehicle? Find out here.

3 Investigations for 2011 HYUNDAI Genesis Coupe

On october 28, 2013, hyundai motor company (hyundai) submitted a defect information report (dir) to nhtsa describing a safety defect in the braking system of approximately 43,500 model year (my) 2009 through 2012 hyundai genesis sedans (nhtsa recall no. 13v-489).the hyundai report indicates that the recalled vehicles may contain brake fluid that does not sufficiently inhibit corrosion on the zinc plating of control valve armatures in the hydraulic electronic control unit (hecu) module. the dir indicated that, over time, the build-up of corrosion products may affect operation of hecu control valves, resulting in a low/soft brake pedal with reduced brake effectiveness, which may increase the risk of a crash.in october 2011, the hecu supplier notified hyundai that the brake fluid used in production plants was causing corrosion of valve armatures in the control module.the supplier changed the coating of the valve armatures in late march 2012 to correct the problem in production vehicles.hyundai's recall includes genesis vehicles produced prior to the implementation of the hecu change.in march 2013, hyundai initiated a service campaign (tl6) to replace brake fluid in the subject vehicles with brake fluid with better corrosion resistance properties.according to hyundai's dir letter, after pe13-033 was opened, the company noted that some of the vehicles serviced in the tl6 campaign subsequently required hecu replacement.this was an indication that internal corrosion had progressed enough to affect valve operation and brake performance, prompting hyundai to conduct a safety recall.hyundai's repair procedures for 13v-489 require brake system flushing and replacement in all recalled vehicles with a new fluid containing the necessary corrosion inhibitor.in addition, for vehicles produced prior to june 1, 2010, dealers will perform an inspection procedure to verify that the hecu is functioning properly and replace units that do not meet the test requirements.hyundai indicated that, based on analysis of claim data, only vehicles produced prior to june 1, 2010 have been in service long enough to require the additional inspection/replacement of the hecu. analysis of failure data reported to nhtsa and provided by hyundai in response to odi's information request letter for pe13-033 identified 756 complaints and 1,683 warranty claims for 30,114 subject vehicles produced prior to june 1, 2010, resulting in a complaint rate of 25.1 incidents per thousand vehicles (iptv) and a claim rate of 5.6 percent.the my 2009 vehicles, with the longest exposure times, experienced the highest complaint (33.5 iptv) and warranty (7.0 percent) rates.for the 45,639 subject vehicles produced after june 1, 2010, odi identified 13 complaints and 34 warranty claims, resulting in a complaint rate of 0.3 iptv and a warranty claim rate of 0.1 percent, indicating that the brake fluid corrosion concern had not progressed far enough to result in significant rates of brake system performance symptoms in those vehicles.this investigation is closed.odi will continue to monitor complaints to evaluate the effectiveness of hyundai's recall.the voqs noted in the failure report are: 10569231, 10560898, 10560495, 10559360, 10558279, 10558264, 10556964, 10556631, 10556577, 10556322, 10554988, 10554802, 10554122, 10552958, 10551817, 10551157, 10551110, 10551092, 10550791, 10550773, 10550431, 10549750, 10549634, 10549629, 10549567, 10549402, 10549376, 10549270, 10549228, 10549186, 10549021, 10548903, 10548823, 10548791, 10548737, 10548722, 10548716, 10548705, 10546565, 10544803, 10543663, 10542962, 10541959, 10541741, 10538208, 10537934, 10536652, 10535436, 10533459, 10525123, 10523412, 10514041, 10511037, 10510525, 10502374, 10499922, 10497935, 10492198, 10491494.

Date Opened	Date Closed	Component
2013-10-17	2014-04-04	SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
2013-10-17	2014-04-04	SERVICE BRAKES, HYDRAULIC
2013-10-17	2014-04-04	SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP

Manufacturers tell dealers about repairs for on your car. But they won’t tell you – unless you know to ask. Knowledge is power.

46 Service Alerts for 2011 HYUNDAI Genesis Coupe

Date	Description
2022-07-14	190000 TIRES Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2022-07-28	060000 ENGINE AND ENGINE COOLING Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2022-07-14	350000 EQUIPMENT Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2022-07-14	355100 EQUIPMENT:OTHER:LABELS Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) sets a threshold for correcting load capacity information indicated on tire placards when the vehicle weight has been increased before retail sale. This limit Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-30	350000 EQUIPMENT This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-23	350000 EQUIPMENT This bulletin provides best practice recommendations when performing brake service procedures. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-23	356000 EQUIPMENT ADAPTIVE/MOBILITY This bulletin provides best practice recommendations when performing brake service procedures. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-10	350000 EQUIPMENT This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-30	060000 ENGINE AND ENGINE COOLING This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-23	030000 BRAKES (PWS) This bulletin provides best practice recommendations when performing brake service procedures. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2021-03-10	060000 ENGINE AND ENGINE COOLING This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-11-19	190000 TIRES This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the ⿿Tire Balance Data Sheet⿝ must be fully completed including imbalance and Road For Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-12-21	110000 ELECTRICAL SYSTEM This bulletin describes the Wireless Android Auto and Wireless Apple CarPlay setup process for Display Audio Value (Non⿿Navigation) devices. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-11-30	030000 BRAKES (PWS) This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-12-17	060000 ENGINE AND ENGINE COOLING This bulletin provides the calibration procedure for the engine bearing clearance tester. The bearing clearance tester is already pre-calibrated, but additional calibration may be required due to variable shop compressor air pressure when t Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-11-19	200000 WHEELS This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the ⿿Tire Balance Data Sheet⿝ must be fully completed including imbalance and Road For Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-12-15	200000 WHEELS This bulletin provides information on wheel cleaning procedure and cleaning agent recommendations. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-05-06	190000 TIRES This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-05-06	200000 WHEELS This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-04-23	110000 ELECTRICAL SYSTEM This bulletin provides information on identifying dealer stock vehicles with either: ⿢ A Battery SOC alert – low Battery State of Charge (SOC) at or below 50%. ⿢ A 30 Day alert – vehicle has not started and reported an SOC in 30 days. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-04-23	350000 EQUIPMENT This bulletin provides information on identifying dealer stock vehicles with either: ⿢ A Battery SOC alert – low Battery State of Charge (SOC) at or below 50%. ⿢ A 30 Day alert – vehicle has not started and reported an SOC in 30 days. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-05-01	350000 EQUIPMENT This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-07-14	120000 EXTERIOR LIGHTING This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the la Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-07-14	350000 EQUIPMENT This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the la Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-07-14	356000 EQUIPMENT ADAPTIVE/MOBILITY This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the la Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-04-17	100000 POWER TRAIN The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-04-17	355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-04-17	356000 EQUIPMENT ADAPTIVE/MOBILITY The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions: Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-03-23	356000 EQUIPMENT ADAPTIVE/MOBILITY This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-11-04	270000 LANE DEPARTURE The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects v Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-11-04	280000 BACK OVER PREVENTION The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects v Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-01-16	110000 ELECTRICAL SYSTEM This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bullet Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-10-14	356000 EQUIPMENT ADAPTIVE/MOBILITY This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and m Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2020-02-05	020000 SUSPENSION This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years. Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-04-15	100000 POWER TRAIN This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot b Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-04-15	110000 ELECTRICAL SYSTEM This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot b Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-03-13	130000 VISIBILITY This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual par Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2019-03-13	135000 VISIBILITY:REARVIEW MIRRORS/DEVICES This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual par Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2013-04-01	073000 FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM HYUNDAI: THE THROTTLE CONTROL (ETC) BODY, ON SOME VEHIICLES, NEEDS TO BE CLEANED AND PROCEDURAL INFORMATION IS BEING PROVIDED, DUE TO DEPOSITS FOUND AT VALVE-TO-BORE INTERFACE. MODELS 2011-2013 ELANTRA, 2010-2013 GENESIS COUPE, 2010-2013 Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2013-04-01	060000 ENGINE (PWS) HYUNDAI: THE THROTTLE CONTROL (ETC) BODY, ON SOME VEHIICLES, NEEDS TO BE CLEANED AND PROCEDURAL INFORMATION IS BEING PROVIDED, DUE TO DEPOSITS FOUND AT VALVE-TO-BORE INTERFACE. MODELS 2011-2013 ELANTRA, 2010-2013 GENESIS COUPE, 2010-2013 Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2013-03-01	103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) HYUNDAI: DUE TO AN ERROR IN THE INTERNAL CONTROL MODULE READ ONLY MEMORY, INFORMATION IS PROVIDED REGARDING THE REPLACING OF THE PCM AND A POSSIBLE WARRANTY CLAIM. MODELS 2011-2013 ELANTRA, 2010-2013 GENESIS COUPE, 2010-2013 SANTA FE, 200 Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2016-08-09	103100 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM, PCM) THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2016-10-20	140000 AIR BAGS THE HYUNDAI GENESIS COUPE IS EQUIPPED WITH AN OCCUPANT CLASSIFICATION SYSTEM (OCS) TO DETERMINE IF THE FRONT PASSENGER SEAT IS OCCUPIED, AND IF SO, DETECT THE PRESENCE OF A CHILD RESTRAINT SYSTEM OR SMALL STATURED OCCUPANT. IN CERTAIN CASES Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2016-10-20	141100 AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE THE HYUNDAI GENESIS COUPE IS EQUIPPED WITH AN OCCUPANT CLASSIFICATION SYSTEM (OCS) TO DETERMINE IF THE FRONT PASSENGER SEAT IS OCCUPIED, AND IF SO, DETECT THE PRESENCE OF A CHILD RESTRAINT SYSTEM OR SMALL STATURED OCCUPANT. IN CERTAIN CASES Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2016-10-20	220000 SEATS THE HYUNDAI GENESIS COUPE IS EQUIPPED WITH AN OCCUPANT CLASSIFICATION SYSTEM (OCS) TO DETERMINE IF THE FRONT PASSENGER SEAT IS OCCUPIED, AND IF SO, DETECT THE PRESENCE OF A CHILD RESTRAINT SYSTEM OR SMALL STATURED OCCUPANT. IN CERTAIN CASES Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")
2016-10-20	141320 AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE THE HYUNDAI GENESIS COUPE IS EQUIPPED WITH AN OCCUPANT CLASSIFICATION SYSTEM (OCS) TO DETERMINE IF THE FRONT PASSENGER SEAT IS OCCUPIED, AND IF SO, DETECT THE PRESENCE OF A CHILD RESTRAINT SYSTEM OR SMALL STATURED OCCUPANT. IN CERTAIN CASES Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

2011 HYUNDAI Genesis Coupe

3 Recalls for 2011 HYUNDAI Genesis Coupe

0 Complaints sent to the Center for Auto Safety for 2011 HYUNDAI Genesis Coupe

13 Complaints submitted to NHTSA for 2011 HYUNDAI Genesis Coupe

3 Investigations for 2011 HYUNDAI Genesis Coupe

46 Service Alerts for 2011 HYUNDAI Genesis Coupe