2010 DODGE Ram

Rear wheels locked up while driving...brought truck in and was told it was not an issue and nothing was wrong. *tr

Driveshaft disconnected/slipped out of rear diff (hanging down - still on truck) loss of power/had to coast to a safe area during coasting came to a sudden stop/something locked up in rear diff. *tr

The truck started making a whirring down shifting noise then a loud noise then the truck seized to a halt drive shaft now laying on ground. *tr

While traveling a local road at approximately 30 mph, the rear differential made a short term humming noise and then a grinding sound. rear differential locked up shearing the pinion shaft and allowing the driveshaft to drop free of the rear differential, hit the bottom of the truck several times and then drop to the ground. vehicle was towed to the local dealership where it remains waiting on parts. according to the dealership, chrysler has switched suppliers of the ring and pinion kits and there is currently a backorder of approximately 175 parts kits. current release date for the parts is october 2012. *tr

While riding rear-facing in her car seat, my daughter put her foot over the side of the seat and accidentally kicked the tilt-release mechanism on the latch strap, causing the strap to loosen several inches. i am a cpst, and i am certain the seat was installed tightly and correctly before she kicked the release. i had heard of this problem happening to other people, so i diligently check my seat each time we use it. i feel the design of the seat and the placement of the tilt-release makes accidental loosening a real danger for anyone using the seat. (related vehicle information: model year=2010, make=dodge, model=ram). *tr

While driving home 10/20 ~8pm, i was slowing down in freeway traffic ~45mph. i took my foot off the brake and was just about to press down on the accelerator pedal, my truck surged forward for about .25 of a second (split second). this has happened in the past ~8 times. i notified the dealer at 26,000 mile service and they said it was the engines switching between the eco mode and normal mode. (5.7 hemi). please advise. (i purchased this vehicle new from folsom dodge, ca.) *tr

Tl* the contact owns a 2010 dodge ram with goodyear wrangler h/p tires, line size 275/60r20. the contact was driving 5 mph when the tire pressure warning light illuminated and the front driver side tire blew. the contact stated that the first blow out was in the tread. the contact replaced the tire with the spare and noticed that the blow out originated at the side wall. one week later while driving 5 mph, the rear driver side tire blew. the contact changed that tire with a spare as well. the contact did not call the manufacturer. the contact believed that the tires were defective. the failure mileage was 13,000.

This is not a complaint based on a specific occurrence. i am a professional driver who operates a variety of passenger vans and busses between various cities. in recent years it has become increasingly more difficult to drive during non-daylight hours do to the type of headlights that are now allowed on passenger and truck vehicles. the intensity and brightness level of headlights has increased to a point where the glare and blinding effect of oncoming headlights has become a significant safety factor, especially on two lane highways. furthermore, many vehicles are now equipped with a four headlight system as their regular night time running lights. the optional "fog lights" for severe weather conditions is now standard lighting protocol. the other option on these vehicles is their "bright" option which creates an even more hazardous situation for oncoming traffic due to their blinding effect. this "upgraded" headlight, fog light, and bright light trend needs to be toned back down to intensity and brightness levels that existed a few years ago and are reasonable for oncoming traffic to adjust to. it is a simple matter of fact that these high level headlight options are the cause of more unnecessary accidents and casualties than ever before. *tr

2010 dodge ram. consumer writes regarding trailer braking system *tgw the consumer stated when pulling a trailer, the factory installed trailer brake control will deliver up to 10 volts to the trailer brakes only when operating the hand control. by contrast, the brake pedal will not deliver any more than a few volts to the trailer and is inadequate to stop the vehicle. *jb

Head on collision going 45mph. car pulled out of intersection into path of our 2010 dodge dakota and stopped. applied brakes and hit head on. driver airbag did not deploy. *tr

Tl* the contact owns a 2010 dodge ram 1500. the contact stated when driving at various speeds, the electrical components of the vehicle would continuously fail and the vehicle would stall without warning. the vehicle was taken to the dealer three times but the failure could not be duplicated. the failure became progressively worse to the point where the vehicle would no longer start. the vehicle was not repaired. the vin was not available. the failure mileage was 3,500 and the current mileage was 10,000.

Tl*the contact owns a 2010 dodge ram 3500. while driving approximately 55 mph during sunny weather conditions the contact stated that there was a glare on the chrome finished ram in the center of the console on the steering wheel that impaired the driver and front seat passengers vision. he stated that it only occurred on sunny days. the vehicle was not taken to an authorized dealer. a complaint was filed with the manufacturer. the approximate failure mileage was 400.

2010 dodge ram hd diesel e/w new integrated trailer brake controller. new brake controller failure. the brake controller failure disconnected 3 times going down a steep grade. also there was very little brake pressure coming from the integrated brake controller. faxed all of the information to dealer and they said their tech was busy and did not have time to call dodge to see if there is an ongoing problem with the new controller. dealer is rio vista dodge, location rio vista, ca. i feel dealer should have looked at this problem because it is a safety issue. *tr

Tl* the contact owns a 2010 dodge ram 3500. while driving at various speeds, the front seats, floorboard and console would vibrate excessively when driving over an uneven road surface. the dealer advised contacting the manufacturer for further assistance. the contact stated he test drove the same year, make and model vehicle while at the dealers and the vehicle exhibited the exact same failure as his vehicle. the vehicle was not repaired. the failure mileage was 0 , and the current mileage was 4,437. updated 6/19/10 *cn updated 07/22/10*jb

Information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(b)(6) city of ottawa has four (4) dodge ram 5500 units, bought in march 2010 with vin numbers listed below, all have been plagued with steering problems which drifts at speeds over 70 kmh and is difficult to control when facing consecutive small bumps - so much that in my test ride i was afraid i could end up in the opposite lane of traffic and cause a head-on collision. my personal concern is that if new or inexperienced drivers face such steering, it could cause accident, damage or even fatality if it goes unchecked. unfortunately the dealerships (southbank and capital dodge) seem to have very little knowledge of the root cause and no capacity to do real analysis and testing on these units. chrysler corporate has been contacted via 1-800 phone calls and fleet emails and files were opened on all our units but that has been the extent of their cooperation, and even the local service managers have not heard from chrysler¿s engineering or the district service manager who usually tends to such calls. vin# [xxx] , city of ottawa¿s unit b5-3359, 4wd, at southbank chrysler, test driven per above, deemed not safe at high speeds. vin# [xxx] , city of ottawa¿s unit b5-3360, 4wd, has been at capital dodge, it has had some repairs done, and was also test driven and steered normally. dealer has yet to share with us the details of the repairs or retrofits performed. we suspect steering box was replaced. vin# [xxx] , city of ottawa¿s unit b5-3358, 4wd, at southbank chrysler, the steering box was replaced, and then unit was deemed acceptable. vin# [xxx] , city of ottawa¿s unit b5-3357, 2wd, although a few complaints from users re steering, but mechanics accepted the unit. *tr

2010 dodge ram goes into reverse by itself. *tr

Warning lite for air bag deployment stays on. in shop for two weeks at this time and the auto tech and factory tech have no idea how what to repair. wires from the dash, console, door panels (factory wire loom) are open for tracing. dodge did not send out the proper wire schematic for the 2010 ram. last report was that they are guessing at a repair. *tr

Driving around 30 miles per hour, and it has happened twice it has surged in speed with out pressing the gas pedal for no reason. nothing was done because being it doesn't happen all the time when i take it to the dealer it will not happen more than likely.*tr

Gas pumps do not shut off and tank overfills spilling gas on truck and cement. *tr

Gas pedal stuck to floor. *tr

Odi received complaints regarding failing tie rod ball studs on model year 2008-2011 dodge ram 2500 and 3500 vehicles resulting in loss of steering control.chrysler concluded that misalignment of the left (driver side) ball stud on vehicles built with the cross car steering linkage system could allow contact between the bull stud and the ball housing which could weaken the stud and result in fracture.chrysler submitted a recall notice on august 15, 2011 involving certain my 2003-2011 ram 2500 and ram 3500 pickup trucks built or repaired with the cross car steering linkage.chrysler will inspect, repair or realign the front end of the subject vehicles as needed.chrysler's announcement of a safety recall on this matter addresses odi's concerns.the odi reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/searchnhtsaid under the following identification (odi) numbers:10332525, 10357937, 10366591, 10303744, 10377166, 10373240, 10343969, 10375403, 10324831, 10373546, 10370771.