2002 AUDI S8

These recalls apply to the make, model, and year of your car – and should be fixed as soon as possible.

0 Recalls for 2002 AUDI S8

Recall Date Component Summary
These are complaints about vehicles like yours and some can only be found here. Do they sound familiar?

0 Complaints sent to the Center for Auto Safety for 2002 AUDI S8

skip to NHTSA complaints

Date Component  

0 Complaints submitted to NHTSA for 2002 AUDI S8

skip to CAS complaints

Date Component  
Is the government investigating the safety of your vehicle? Find out here.

0 Investigations for 2002 AUDI S8

Date Opened Date Closed Component  
Manufacturers tell dealers about repairs for on your car. But they won’t tell you – unless you know to ask. Knowledge is power.

54 Service Alerts for 2002 AUDI S8

Date Description
January 9, 2013 060000 ENGINE AND ENGINE COOLING

Engine oils that meet Audi Oil Quality Standards.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

April 25, 2013 060000 ENGINE AND ENGINE COOLING

Discontinuation and mixing of Audi-approved engine coolants.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 5, 2013 280000 BACK OVER PREVENTION

If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds,

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 20, 2013 060000 ENGINE AND ENGINE COOLING

Discontinuation and mixing of Audi-approved engine coolants.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 29, 2014 100000 POWER TRAIN

Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 3, 2014 060000 ENGINE AND ENGINE COOLING

As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 3, 2014 100000 POWER TRAIN

As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 3, 2014 103240 POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:SEALS/GASKETS

As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 28, 2014 100000 POWER TRAIN

This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of El

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 28, 2014 252100 ELECTRONIC STABILITY CONTROL:CONTROL MODULE:SOFTWARE

This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of El

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 29, 2013 030000 BRAKES (PWS)

This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who consciously or unconsciously drive with their left foot resting on the brake pedal are prone to experience this condition.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 25, 2021 160000 STRUCTURE

This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 25, 2021 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

April 16, 2020 353000 EQUIPMENT:ELECTRICAL

This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 28, 2017 350000 EQUIPMENT

This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 17, 2019 110000 ELECTRICAL SYSTEM

00 Software Version Management (SVM), operating instructions

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

July 31, 2017 120000 EXTERIOR LIGHTING

This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light l

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 3, 2017 350000 EQUIPMENT

Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

July 7, 2015 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 23, 2013 356000 EQUIPMENT ADAPTIVE/MOBILITY

Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

October 12, 2014 200000 WHEELS

Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 10, 2014 110000 ELECTRICAL SYSTEM

High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 10, 2017 060000 ENGINE (PWS)

This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

October 19, 2016 200000 WHEELS

This information TSB provides information regarding the correct way to torque adjust a wheel bolt.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 4, 2014 350000 EQUIPMENT

This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 21, 2013 070000 FUEL SYSTEM, GASOLINE

Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 21, 2013 110000 ELECTRICAL SYSTEM

Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 20, 2015 110000 ELECTRICAL SYSTEM

Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: “Device or cable type not supported”. The AMI cable being used is a genuine Audi-branded cable with an Aud

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 6, 2015 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 20, 2013 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 10, 2015 355100 EQUIPMENT:OTHER:LABELS

Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

October 2, 2013 160000 STRUCTURE

Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

October 2, 2013 350000 EQUIPMENT

Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 9, 2013 200000 WHEELS

Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should no

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 9, 2013 203000 WHEELS:LUGS/NUTS/BOLTS

Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should no

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 5, 2013 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle’s engine experienced a serious mechanical problem

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 10, 2015 070000 FUEL SYSTEM, GASOLINE

Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the origi

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

December 10, 2015 080000 FUEL SYSTEM, DIESEL

Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the origi

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

July 31, 2014 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 21, 2015 118000 ELECTRICAL SYSTEM:SOFTWARE

Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system ma

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

September 8, 2015 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service a

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 20, 2014 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

February 13, 2015 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiri

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

October 24, 2012 120000 EXTERIOR LIGHTING

Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

April 17, 2015 121000 EXTERIOR LIGHTING:HEADLIGHTS

Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake l

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 25, 2013 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for serv

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

April 1, 2013 355200 EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 29, 2015 110000 ELECTRICAL SYSTEM

Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for curre

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 17, 2015 060000 ENGINE AND ENGINE COOLING

Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is pos

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

March 9, 2015 070000 FUEL SYSTEM, GASOLINE

Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves,

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

May 28, 2014 101100 POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/HAND LEVER(MOTORCYCLE)

Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks powe

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 3, 2014 103000 POWER TRAIN:AUTOMATIC TRANSMISSION

Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011. Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

June 3, 2014 103600 POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES

Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011. Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

July 15, 2014 118000 ELECTRICAL SYSTEM:SOFTWARE

Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

2002 AUDI S8

search for another vehicle

Loading...