1991 SUZUKI Swift

These recalls apply to the make, model, and year of your car – and should be fixed as soon as possible.

2 Recalls for 1991 SUZUKI Swift

Recall Date Component Summary
1995-05-24 SEAT BELTS:FRONT:BUCKLE ASSEMBLY | SEAT BELTS:FRONT:BUCKLE ASSEMBLY

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED “PRESS.” IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Remedy:

OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.

1993-11-30 LATCHES/LOCKS/LINKAGES:HOOD:LATCH

MISLOCATED ATTACHING SPOT WELDS OF THE HOOD STRIKER ASSEMBLY CAUSE CRACKS TO START ON THE HOOD INNER PANEL. IF CRACKS OCCUR, THE HOOD STRIKER ASSEMBLY MAY NOT PROPERLY ENGAGE THE HOOD LATCH WHEN THE HOOD IS CLOSED.

Remedy:

SUZUKI WILL (A) INSTALL TWO BOLTS AND NUTS TO SECURE THE STRIKER ASSEMBLY TO THE HOOD INNER PANEL, AND (B) ENSURE THAT THE HOOD LATCH ASSEMBLY FASTENERS ARE PROPERLY TIGHTENED.

These are complaints about vehicles like yours and some can only be found here. Do they sound familiar?

0 Complaints sent to the Center for Auto Safety for 1991 SUZUKI Swift

skip to NHTSA complaints

Date Component  

11 Complaints submitted to NHTSA for 1991 SUZUKI Swift

skip to CAS complaints

Date Component  
2015-01-24 STRUCTURE:BODY:HOOD
ODI Number: 10678676
1995-05-01 SEAT BELTS
ODI Number: 964587
1995-05-22 SEAT BELTS:FRONT:ANCHORAGE
ODI Number: 965601
1998-08-27 STEERING: STEERING WHEEL/HANDLE BAR
ODI Number: 827274
1998-01-16 LATCHES/LOCKS/LINKAGES:DOORS:LATCH
ODI Number: 528436
1998-01-16 SEAT BELTS:FRONT:ANCHORAGE
ODI Number: 528436
1998-01-16 LATCHES/LOCKS/LINKAGES:HOOD:LATCH
ODI Number: 528436
1998-01-16 VISIBILITY:WINDSHIELD
ODI Number: 528436
1997-09-23 LATCHES/LOCKS/LINKAGES:HOOD:LATCH
ODI Number: 522381
1997-09-23 UNKNOWN OR OTHER
ODI Number: 522381
1995-12-13 SEATS | SEATS:FRONT ASSEMBLY:RECLINER
ODI Number: 976500
Is the government investigating the safety of your vehicle? Find out here.

1 Investigations for 1991 SUZUKI Swift

Date Opened Date Closed Component  
1995-03-10 1995-08-02 SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Manufacturers tell dealers about repairs for on your car. But they won’t tell you – unless you know to ask. Knowledge is power.

3 Service Alerts for 1991 SUZUKI Swift

Date Description
2018-11-20 020000 SUSPENSION

This Service Bulletin was sent by Suzuki Motor Corporation to its authorized Suzuki automobile distributors in the U.S., explaining the importance of proper inspection and maintenance of suspension lower arm ball joints to prevent the ball

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

2018-11-20 350000 EQUIPMENT

This Service Bulletin was sent by Suzuki Motor Corporation to its authorized Suzuki automobile distributors in the U.S., explaining the importance of proper inspection and maintenance of suspension lower arm ball joints to prevent the ball

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

062000 ENGINE AND ENGINE COOLING:COOLING SYSTEM

CORRECT COOLANT USAGE. *EH

Click to view a copy of the full alert on NHTSA's website (select "Manufacturer Communication")

1991 SUZUKI Swift

search for another vehicle

Loading...